Well Drilling in Kendall County, TX

Kendall County, from Boerne out to the smaller hill communities, runs almost entirely on private wells and small water systems. If you are putting a home or a homestead on raw land here, water is the first question to answer.

What well drilling costs in Kendall County

$3,710 to $15,900 for a typical residential well (100 to 400 feet is common). Your real number depends on depth and ground conditions, which is why an on-site quote beats any calculator.

Questions to ask before you hire

  • Are you licensed and bonded for water-well work in this state?
  • What depth do most wells in this county hit water, and how do you price by foot?
  • Do you handle the permit and the well-log filing, or do I?
  • What pump and pressure-tank setup do you recommend for my acreage?
  • What is your guarantee if the first hole comes up dry?

What to know about well drilling in Texas

Much of Kendall County sits over the Trinity Aquifer and near the Edwards recharge zone, where karst limestone means fractures, caverns, and unpredictable yields. Drilling into karst takes a careful hand. A local well pro will know which parts of the county tend to come in strong.

Texas licenses water-well drillers and pump installers at the state level, while building, septic, and land-use permits are handled county by county. Rural counties often have lighter permitting than metro areas, but septic (OSSF) permits and well-log filings are near universal. Confirm with your county before work starts. Always confirm current requirements with Texas Department of Licensing and Regulation and your county.

Get matched with a Kendall County well pro

Tell us about your project and we will connect you with one vetted local driller. Offsprig is paid by the contractor, never by you.

Common questions

How much does it cost to drill a well?

Most residential wells run between $3,500 and $15,000, driven mostly by depth and ground conditions. Hard rock and deep water tables push the price up.

How long does it take to drill a residential well?

A straightforward residential well is usually drilled in one to three days once permits are in hand. Pump and pressure-tank hookup add a day.

Do I need a permit to drill a well?

Most states and counties require a permit and a filed well log. A licensed driller typically handles this, but confirm it in writing.